CNC Router and CNC Machining Center Series
ATA Engineering
Series ICV Series ICV
The ICV 4030 is a further development of the tried-and-tested, 3D-capable CNC machine CPV 4030, which is delivered ready for connection to the power supply.
The sliding hood, which opens upwards, can be conveniently operated from a sitting position. The completely bolted chassis produces higher precision when assembling the machine and makes it easier to service.
Moreover, it was possible to optimise the resonance and vibration behaviour and thus achieve lower noise levels. The only prerequisites for working with the ICV 4030 are basic knowledge of CNC systems, general IT literacy and basic knowledge of graphics programs!
ATA Engineering
Flatbed Series

Flatbed and Portal Units
Flatbed units as defined in the machine guidelines as incomplete machines according to the modular system with processing paths of 250 to 1250 mm. Step motors (MS200HT), set for no-play, are used as spindle drives Recirculating ball drives with a repeatability of ± 0.02 mm (positioning reproducibility) are used.

The linear guides used are the isel double track feeds, proven over many years, with no-play pre-stressed linear ball bearings and recirculating ball spindles with a repeatability of ± 0.02 mm. All units are equipped with two limit switches per spindle. The machining and positioning units are available in a number of versions and are characterised by smooth running and high process speeds.

 

ATA Engineering
Flatcom XL Flatcom XL Series
The choice of the ideal CNC machine for you should focus both on the clamping area for the workpiece, materials or plates to be machined and on the strategy or difficulties of the machining. In principal, all machines are perfectly suited for machining light metals, non-ferrous metals, plastics and wood . Extensive range of accessories for all our CNC machines to order.
FlatCom XL 102/72:
Processing areas X/Y/Z [mm]* 1020/720/220
FlatCom XL 102/112:
Processing areas X/Y/Z [mm]* 1020/1120/220
FlatCom XL 142/112:
Processing areas X/Y/Z [mm]* 1420/1120/220
FlatCom XL 142/162:
Processing areas X/Y/Z [mm]* 1420/1620/220
FlatCom XL 142/252:
Processing areas X/Y/Z [mm]* 1420/2520/220
ATA Engineering
Flatcom L Flatcom L Series
The choice of the ideal CNC machine for you should focus both on the clamping area for the workpiece, materials or plate to be machined and on the strategy or difficulties of the machining. In principal, all machines are perfectly suited for machininglight metals, non-ferrous metals, plastics and wood . Extensive range of accessories for all our CNC machines to order.
FlatCom L 150:
Processing areas X/Y [mm] * 1500/1700
FlatCom L 250:
Processing areas X/Y [mm] * 2500/1700
ATA Engineering
Euromod

Euromod Series
The choice of the ideal CNC machine for you should focus both on the clamping area for the workpiece, materials or plates to be machined and on the strategy or difficulties of the machining.
In principal, all machines are perfectly suited for machining light metals, non-ferrous metals, plastics and wood. Extensive range of accessories for all our CNC machines to order.

X = 650 / 1,000 mm,
Y = 300 / 450 / 650 mm,
Z = 250 mm
ATA Engineering
Series ICP Series ICP
The ICP series CNC machines are a further development of the tried-and-test CPM series. By the introduction of a sliding door, the machines can now be operated in sitting position, which, amongst other things, results in shorter cycle times for opening the cover.

The chassis is completely bolted, instead of welded like its predecessor. This produces higher precision when assembling the machine and makes it easier to service. Moreover, it was possible to optimize the resonance and vibration behavior and thus achieve lower noise levels.



ATA Engineering

 

ATA Engineering Processes Ltd      t: 01442 264411      f: 01442 231383      e: sales@ataeng.com